Fluke TiX500 - Review Image; Edit Image

TiX500, TiX520, TiX560, TiX580
Users Manual
34
Review Image
To review an image:
1. Open the Memory menu.
2. Select the preview image of the file for review.
3. Push  to review the file.
Edit Image
Before or after you save a file, you can use the Imager to edit or modify the image.
Note
A Bluetooth headset is required and the radio must be enabled to record audio
files. This feature may not be available in all regions.
IR-PhotoNotes System
Use the IR-PhotoNotes photo annotation system to capture visible images of various objects,
text, or other information that is related to the analysis and reporting of an infrared image. A
visible image is a clear digital photo and does not use infrared technology. Examples of
possible annotations include motor name plates, printed information or warning signs, larger
views of the environment or room, and related equipment or objects. IR-PhotoNotes images
are only available in the .is2 file format and are stored in the file so you do not need to collate
multiple files at a later time.
To add photos using the IR-PhotoNotes annotation system:
1. With an infrared image in the buffer, push  to open the Edit Image menu.
2. Select IR-PhotoNotes.
3. Push  to enter the Picture mode.
4. Capture an image.
5. Capture additional images as required. See Detailed Specifications for the maximum
number of images that can be stored with IR-PhotoNotes.
6. Push  to save the pictures with the image.
To view an IR-PhotoNote annotation in memory:
1. Open the Memory menu.
2. Select a file to view. All files with IR-PhotoNotes annotations show  with the preview
file.
3. Push  to view the photo annotations.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com