Fluke TiX500 - Date; Time; Smartview Software

Expert Series Thermal Imagers
SmartView Software
39
Date
The date shows as: MM/DD/YY or DD/MM/YY.
To set the date:
1. Select Settings > Date.
2. Select MM/DD/YY or DD/MM/YY.
3. Push  to set the new format.
4. Select Set Date.
5. Push  to open the Set Date menu.
6. Push / to select Day, Month, or Year.
7. Push / to change the day, month, or year.
8. Push  to set the date and exit the menu.
Time
Time shows as: 24 hour or 12 hour.
To set the time format:
1. Select Settings > Time.
2. Select 24 hour or 12 hour.
3. Push  to set the time format.
4. Select Set Time.
5. Push  to open the Set Time menu.
6. Push / to select Hours or Minutes.
7. If you selected the 12 hour format, select AM or PM.
SmartView Software
SmartView software for a PC is available to use with the Imager and contains features to
analyze images, organize data and information, and make professional reports.
Use SmartView software to:
• Review IR-PhotoNotes, audio, and text annotations.
• Export IR and visible images.
• Edit .is2 image files and .is3 video files.
• Enable Bluetooth, WiFi, and Fluke Connect functions.
• Update the firmware for new Imager feature
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com