Expert Series Thermal Imagers
Radio Frequency Data
49
Optional 12 V Vehicle Charger
1. Connect the 12 V adapter into the 12 V accessory socket of the vehicle.
2. Connect the output to the ac power socket of the Imager.
3. Charge until the indicator shows full on the screen.
4. Disconnect the 12 V adapter and Imager when battery is fully charged.
Caution
To prevent damage to the Imager, remove it from the DC car
charger before you start or jump start the vehicle.
• Always operate in the specified temperature range.
• Do not store the batteries in extreme cold environments.
• Do not attempt to charge the batteries in extreme cold environments.
Caution
Do not incinerate the Product and/or battery. Go to Fluke’s
website for recycling information.
Radio Frequency Data
See Table 14 for instructions on how to access digital copies of the Certificate IDs on the
Imager.
General Specifications
TiX500 TiX520 TiX560 TiX580
Temperature
Operating -10 °C to 50 °C (14 °F to 122 °F)
Storage -20 °C to 50 °C (-4 °F to 122 °F) without batteries
Relative Humidity 10 % to 95 % non-condensing
Altitude
Operating 2000 m
Storage 12 000 m
Display 14.5 cm (5.7 in) touchscreen diagonal landscape color VGA LCD with backlight
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
