Expert Series Thermal Imagers
Safety Information
3
•
Use only Fluke approved power adapters to charge the battery.
•
Keep cells and battery packs clean and dry. Clean dirty
connectors with a dry, clean cloth.
•
Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and
get medical aid.
•
Do not disassemble the battery.
•
Repair the Product before use if the battery leaks.
•
Use only the external mains power supply included with the
Product.
•
Do not put metal objects into connectors.
•
Use only specified replacement parts.
•
Have an approved technician repair the Product.
•
Remove the batteries if the Product is not used for an extended
period of time, or if stored in temperatures above 50 °C. If the
batteries are not removed, battery leakage can damage the
Product.
•
Disconnect the battery charger and move the Product or battery
to a cool, non-flammable location if the rechargeable battery
becomes hot (>50 °C) during the charge period.
•
Replace the rechargeable battery after 5 years of moderate use or
2 years of heavy use. Moderate use is defined as recharged twice
a week. Heavy use is defined as discharged to cutoff and
recharged daily.
•
Do not short the battery terminals together.
•
Do not keep cells or batteries in a container where the terminals
can be shorted.
•
Do not look into the laser. Do not point the laser directly at
persons or animals or indirectly off reflective surfaces.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
