Fluke TiX500 - Page 23

Expert Series Thermal Imagers
Menus
19
To set the size of the Spot Box when Spot Box is set to On:
1. Select Measurement > Spot Box > Set Size.
2. Push:
•  to decrease the vertical size of the Spot Box.
•  to increase the vertical size of the Spot Box.
•

to decrease the horizontal size of the Spot Box.
•

to increase the horizontal size of the Spot Box.
When you are satisfied with the size of the Spot Box, push  to set the change and exit
the menus or push  to set the change and go back to the previous menu.
To set the position of the Spot Box when Spot Box is set to On:
1. Select Measurement > Spot Box > Set Position.
2. Push  
 
to move the Spot Box location on the image.
3. When you are satisfied with the position of the Spot Box, push  to set the change and
exit the menus or push  to set the change and go back to the previous menu.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com