Flyer Gotour 6 - 10. Before Each Ride; Pre-Ride Safety Checklist

30
3. Adjust the tension with the lever half open until
theangetsclosely
4.Closetheleverfully.Checkthetandretighten
if necessary
Removal
1. Open the lever fully
2.Pushthenutuntiltheangeretracts
AskyourFLYERspecialistretailertoex-
plain in detail how the wheels and all
relevant parts are
to be correctly and
safely attached using the quick release
fastener or quick release axle system
installed.
Inappropriately installed wheels may
shift while you are driving or detach from
the vehicle. This may damage the vehi-
cle and lead to severe or life-threatening
injuries to the driver
. It is therefore im-
portant to take note of the following in-
structions:
Ensure
that the axle, thedropouts and
quick release mechanisms are free of
dirt. Take care that they are correctly at
-
tached at all times.
Contact your FL
YER specialist retailer
and have your vehicle checked when
you are not sure.
Check that all quick release fasteners
and quick release axles are rmly at-
tached, even if your FLYER only re-
mained unsupervised for a short time.
Y
ou may only start driving when all quick
releasefastenersarermlyclosed.
SuntourQ-Locaxle
Installation
1.Checktheangeandopentheleverfullybe-
fore installation
2.Pushintheaxleuntilitclicks