FMC Technologies Smith Meter AccuLoad II User Manual

Section V - Program Codes
MN06065 Rev. 0.3 (8/97) 45
Code Description
110 Set Date
111 Dynamic Display Time-out
112-139 Unassigned at Present
140 Protection of Program Codes 180-189
141 Local Mode Alarm Clearing
142 Decimal or Comma Selection
143 Alarm Relay
144
Run & Ready Mode Initialization
Note: This code applies to RBU-05 and above firmware.
145
Ready/Run Mode Clearable Alarms Selection
Note: This code applies to RBU-08 and above firmware.
146-179 Unassigned at Present
180 Programming Access Code
181 Transaction Security ID
182 Transaction Security Prompt Message
183 Auto Reset Timer
184 Ready Mode Message
185
Run & Ready Mode Customized Display
Note: This code applies to RBU-05 and above firmware.
186
Power Failure Alarm
Note: This code applies to RBU-07 and above firmware.
187-199 Unassigned at Present
200 System Flow Control Directory
201 Low Flow Start Volume
202 Low Flow Start Percentage
203 Low Flow Start Rate
204 Low Flow Start
205 System First High Flow Rate
206 System Second High Flow Rate
207 System Overrun Alarm Limit
208 Zero Flow Timer
209 Start Delay After Stop
210 Pump Relay Time Delay

FMC Technologies Smith Meter AccuLoad II Specifications

General

Brand	FMC Technologies
Model	Smith Meter AccuLoad II
Category	Measuring Instruments
Language	English