64
P4. Major Parts Listing 686 (continuation)
Qty Description Part No
1 Cylinder100Bore 320 Stroke (table) P39
1 5/3 valve P10
2 Sol Pilots for 5/3 valve, 24VDC P11-24VDC
2 Exhaust control reg P12
1 3/8" bore PVC tube (m) P14
3 1/2" bore PVC tube (m) P15
1 50mm Vacuum gauge P32
1 Vacuum Pump & filter unit, VT4.16 PAP07-(STATE 1P or 3P)
1 Vacuum filter Cartridge PAP15
2 Toggle Clamp MPP20-686
2 Toggle Clamp Lower Nut Adjuster M6 Black MPP25
2 Toggle Clamp Upper Nut Adjuster M6 MPP28
2 Clamp Frame Grip GH27
1 5M Seal kit, 5M Top seal, 3m table seal, sealant SK04
1 10M Seal kit, 10M Top seal, 3m table seal, sealant SK05
1 6mm x 12mm natural rubber Panel seal MPP12
1 Mesh MPP47
2 Clamp Frame Grip GH27
1 5M Seal kit, 5M Top seal, 3m table seal, sealant SK04
1 10M Seal kit, 10M Top seal, 3m table seal, sealant SK05
1 6mm x 12mm natural rubber Panel seal MPP12
1 Mesh MPP47
1 Cylinder100 bore 308mm Stroke (Table with Bolster) P39
1 Table Bolster Unit 686 Bolster
4 1/2” bore wired vacuum hose (m) (VT Option) P44
1 Vacuum Pump & filter unit, U4.20 (VT Option) PAP09-(STATE 1P or 3P)
1 Vacuum filter Cartridge for U4.20 (VT Option) PAP16
1 Vacuum Piston Valve ½” (VT Option) E290-384
1 3/2 Pilot Valve (VT Option) 18900033D2
1 High Temp Pyrometer Unit CT LT15
1 Pyrometer Mirror Unit ACCTAP
1 PLC Input Module 0-10VDC (Pyrometer Option) FX3G 2ADBD
1 Pressure Switch (Pyrometer Option) 398-7045
1 Vacuum Tank
To Next Page
Loading...
