6
MR-8 Owner’s Manual
Precautions upon handling the MR-8
Notes on repair
About copyrights
About damages
• Do not install the MR-8 in locations subject to
the following:
* Extremely high or low temperature, or
significant changes in temperature.
* Excessive humidity or dust.
* Excessive changes in power supply voltage.
* Unstable or significantly vibrating or
shaking surfaces.
* Near a strong magnetic field (such as a TV
or speaker).
• The MR-8 does not use any parts that user can
repair easily. Contact your dealer or the
nearest FOSTEX service station to ask about
repairs.
• Use the packing carton designed for the MR-8
when you transport the MR-8 to the dealer for
repair or return.
If you have discarded the packing box, try to
pack the MR-8 completely using shock
absorbing materials.
Fostex is not responsible for malfunction or
damage due to incomplete packaging or caused
during transport.
• It is prohibited by law to use any part of a CD
recording or video images or audio data for
which copyright is possessed by a third party
for commercial purposes such as contents,
broadcasts, sales, or distribution-any purpose
other than for your personal pleasure.
• Fostex is not responsible for any “direct
damage” or “indirect damage” caused by
using the MR-8.
MODEL MR-8
DIGITAL MULTITRACKER
FOSTEX
100V 18W
50/60Hz
SERIAL NO.
MADE IN CHINA
<Important!>
Equipment name, electrical ratings, serial
number and other information for the MR-
8, are written on bottom side.
• To prevent damage to the MR-8, be sure to
power on the connected devices first, then turn
on the power to the MR-8. When you remove
or connect the cables to the input/output
connectors on the MR-8, make sure that the
track and master faders and volume controls
are set to “0”.
Note for audio interruption
• If you make recording or editing to a song many
times, audio may be occasionally interrupted
when the song is played back, due to data
fragmentation.
Note that this is not a malfunction.
To Next Page
Loading...
