125
MR16 Owner’s Manual (Track editing)
You can exchange whole data (from ABS ZERO to REC END) between the desired track(s).
<Note>:
You cannot exchange track data of a song
protected. Release the protection before exchang-
ing track data.
9) Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where “Move Track
” is highlighted.
10) Press the [STOP] key to exit the menu mode.
<Note>:
If you are not satisfied with the re-
sult, press the [
UNDO/REDO
] key to undo the
operation (see page 119).
1) Load the song you want to edit.
2) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
3) Rotate the [MENU/ENTER] knob to select
"Track Edit
", and press the [MENU/ENTER] knob.
The display now shows the track edit menu
screen.
Exchanging whole track data
Trk 1
Trk 2
Trk 3 Trk 4 Trk 5
Trk 6
Trk 7 Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
Trk 1
Trk 2
Trk 3 Trk 4 Trk 5
Trk 6
Trk 7 Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
A
B
A
B
C
D
C
D
4) Rotate the [MENU/ENTER] knob to select
"Change Track
", and press the [MENU/ENTER]
knob.
The display now shows the screen for select-
ing the source track(s) and destination track(s)
of the exchange operation.
"Source Track" selects the exchange source
track(s), while "Dest. Track" selects the exchange
destination track(s).
Exchanging data between tracks 5/6 and tracks 11/12.
To Next Page
Loading...
