Fostex MR16 - Copying;Pasting Track Data

121
MR16 Owner’s Manual (Track editing)
8) Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where “Erase Track
” is highlighted.
9) Press the [STOP] key to exit the menu mode.
You can copy whole data (from ABS ZERO to REC END) of the desired track(s) of the song cur-
rently loaded and paste it to the other desired track(s). The data on the source track(s) still
remains after the copy/paste operation. Copy/paste operation can be done within the currently
loaded song.
<Note>: You cannot copy/paste track data of a song
protected. Release the protection before copying/
pasting track data.
<Note>: If you are not satisfied with the
result, press the [
UNDO/REDO ] key to undo
the operation (see page 119).
1) Load the song you want to edit.
<Note>: If you want to cancel the erase op-
eration, move the cursor to "
[CANCEL] " on
the screen, and press the [
MENU/ENTER ] knob.
6) Rotate the [MENU/ENTER] knob to select the
desired option, and press the [MENU/ENTER] knob.
“Erase Track = *” is now highlighted on the
screen.
7) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows "Please Wait", immediately
followed by "Completed" when the MR16
completes erasing.
Copying/pasting track data
Trk 1
Trk 2
Trk 3 Trk 4 Trk 5
Trk 6
Trk 7 Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
Trk 1
Trk 2
Trk 3 Trk 4 Trk 5
Trk 6
Trk 7 Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
A
B
A
B
A
B
2) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
Pasting data of tracks 1/2 to tracks 7/8.