139
MR16 Owner’s Manual (Other functions)
Other functions
This chapter describes the following functions which are important for
using the MR16.
(1) Hard disk formatting
(2) Peak hold time setting
(3) Pre-roll/post-roll time setting
(4) Beat resolution mode on/off
(5) Phantom power on/off
(6) AUX OUT 1/2 output mode setting
(7) Initializing the MR16
<Notes>
While a menu screen is shown, you can go up the menu screen level or
directly exit the menu mode by the following operations.
(1) Select “ Back” on a menu screen and press the [MENU/ENTER] knob.
The display returns to the previous (upper level) screen.
Repeating this operation finally exits the menu mode.
(2) Press the [REWIND] key.
The display returns to the previous (upper level) screen.
Repeating this operation finally exits the menu mode.
(3) Press the [STOP] key.
The menu mode exits and the display shows the home screen.
To Next Page
Loading...
