Fostex MR16 - Other Troubles

158
MR16 Owner’s Manual (Troubleshooting)
<Trouble 1>: I cannot hear the rhythm guide click.
• Is the [RHYTHM GUIDE] key is illuminated?
When the [RHYTHM GUIDE] key is not illuminated, the rhythm guide function is
not active and you cannot hear the rhythm guide click.
• Is the "Int Click level" item in the "Rhythm Guide" menu set correctly?
If the "Int Click level" item is set to "00" or a small value, you cannot hear the
rhythm guide click.
<Trouble 2> : I want to hear the rhythm guide click based on the "Signature" and "Tempo"
settings on the rhythm guide setting screen but the rhythm guide click
based on the conductor map is output.
• Is the "Conductor Map" setting on the rhythm guide setting screen set to
"On"?
As shown on the screen below, if "Conductor Map" on the rhythm guide setting
screen is set to "On", the rhythm guide click based on the conductor map is
output. In this condition, the "Signature" and "Tempo" fields on this screen
indicate "- - -" as below, showing that they are disabled.
Set "Conductor Map" to "Off" (see page 91).
Other troubles