59
MR16 Owner’s Manual (Punch in/out)
Punch in/out
Using the punch in/out function of the MR16, you can overwrite the
desired part of the recorded track. "Punch in" means switching from play-
back to recording, while "punch out" means switching from recording to
playback. The MR16 offers three methods for making punch in/out re-
cording.
1) Manual punch in/out using the top panel keys
2) Punch in/out using a footswitch
3) Auto punch in/out at the specified in/out points
The following description assumes that the song you are going to make
punch in/out recording to is loaded and the preparations for recording
is completed.
To Next Page
Loading...
