Using Optimail with the postage scale
37
Hints for operation with the postage scale
– Endorsements are only automatically set if your
FP postage scale is harmonized with the
endorsement imprint data saved in your Optimail.
Read the operator manual of your FP postage
scale for instructions on setting up this function.
– The ‘High postage’ function is switched off as long
as an FP postage scale is controlling the postage
value setting on the Optimail.
– The Optimail can be configured so that
the postage value transferred by the postage
scale is only valid for one meter imprint
.
Proceed as follows when you want to meter a
stack of identical mailpieces: Weigh and meter
one of the mailpieces in the normal way. Then
switch off the scales function. You can now meter
any number of further mailpieces with the
displayed postage value.
To Next Page
Loading...
