FP Mailing Solutions Optimail - TELESET E Error Codes for Loading Abortions; E Codes for Loading Procedure Errors

Error messages and tips for helping yourself
45
“E” codes
Error codes starting with the letter “E” signal abortion
of the remote value setting. The two-digit error
number indicates the cause.
Proceed as follows:
• Acknowledge the error message with the
key.
• Eliminate the cause of the error yourself or call the
TELESET data center or Service. Please observe
the notes in the table below.
• Start loading postage again.
Error message Correction by
Code Cause User
TELESET
data center
Servicing
dealer
E 16
Wrong dialing procedure.
Modem not operating.
E 24
E 25
Modem not operating or
defective.
E 17
E 19
E 20
Internal error.
E 21
Loading procedure terminated
by operator.
E 29
Connection could not be set up
within 70 seconds.
E 30
E 32
E 46
Processing not possible in
TELESET data center.
E 33
Postage meter unknown in
TELESET data center.