Optimail Operator Manual
54
Step 4: Inserting the ribbon cassette
• Open the flap of the ribbon cassette compartment
by lightly pressing the release key.
The flap swings up automatically.
Caution! Make sure you do not crease or tear the
ribbon when inserting it. This prevents breaking of
the ribbon.
Make sure the edges of the ribbon do not fold over.
Creased ribbons are thicker and prematurely fill the
used ribbon spool.
• Remove the new ribbon cassette from its packing.
• If necessary, remove the transport fixture (red
paper strip).
• Tensioning the ribbon. Turn the white ribbon spool
in the direction of the arrow.
Transport fixture
(if any)
To Next Page
Loading...