Franke F3D3P Service Manual

F3D3 Series Service Manual Error Message Guide / Section 1.4
Questions? Call Franke Technical Support Group For Your Area. Page 2 Copyright  2012 Franke, Inc. All rights reserved.
Continued…
Error
Code
Display Window Message
Error Description
Action Required
07-1
Err07-1
Doors Stuck
Clear Dispense Area
Reset
Sensor Unplugged
Check door-open sensor. If
unplugged, plug it in. If faulty,
replace sensor.
07-2
Err07-2
Doors Stuck
Clear Dispense Area
Reset
Door Torque Error in
Forward (Open) Direction
Clear dispense area.
Press Reset (bottom-right)
touchpad to reset.
07-3
Err07-3
Doors Stuck
Clear Dispense Area
Reset
Door Motor Unplugged
Check 24-volt power to door motor
or run Motor Test. (See SM
Section CLPA – Customer Level
Programming Access) If faulty,
replace motor.
08
Err08
Doors Stuck
Call for Service
Reset
Door Torque Error in
Reverse (Close) Direction
Call for Service.
Check door open motor for
obstruction.
For Special Models with LON Works Smart Kitchen Package ONLY!
09
Err09
Missing PN/SN
Enter PN/SN
Reset
Complete PN/SN
information not available
for LON communications.
Enter PN/SN (part number/serial
number) information, per LON
Installation Instructions

Franke F3D3P Specifications

General

Brand	Franke
Model	F3D3P
Category	Dispenser
Language	English