FRÄNKISCHE DATALIGHT User Manual

4 Multicast Configuration
4.1 Multicast Filtering
To enable IGMP Snooping it is necessary to activate multicast filtering and IGMP Snooping for the bridge.
Then further configuration must be done depending on the needed services.
In the menu Multicast > Properties the Bridge Multicast Filtering Status can be enabled.
As a forwarding method, MAC or IP group addresses can be used.
Figure 34: Multicast properties page
DATALIGHT Switch 12+4-Port 1000
19

FRÄNKISCHE DATALIGHT Specifications

General

Brand	FRÄNKISCHE
Model	DATALIGHT
Category	Switch
Language	English