3
Do not remove VFD cover for wiring or periodic inspections
while power is applied or the unit is in operation.
Otherwise, electric shock could occur.
Wiring and periodic inspections should be performed at
least 5 minutes after disconnecting the input power with
DC link voltage below 30VDC.
Otherwise, electric shock could occur.
Operate VFD and control devices with dry hands.
Otherwise, electric shock could occur.
Do not use VFD if power or motor cable is damaged.
Otherwise, electric shock could occur.
Install VFD on a non-flammable surface. Do not place
flammable materials nearby.
Otherwise, fire could occur.
Disconnect the input power if VFD has been damaged.
Otherwise, it could result in a secondary accident and fire.
Do not touch VFD after shutting down or disconnecting it.
It can remain hot for a few minutes.
Otherwise, bodily injuries such as skin-burn or damage could occur.
Do not apply power to a damaged VFD or to VFD with missing
parts.
Otherwise, electric shock could occur.
Do not allow lint, paper, wood chips, dust, metallic chips or
other foreign material into the drive.
Otherwise, fire or accident could occur
WARNING
CAUTION
To Next Page
Loading...