Freenove ESP32 User Manual

Need support?  support@freenove.com
17
Chapter 0 Install CH340 and Burn Firmware
█ www.freenove.com
6. Make sure ESP32 has connected to your computer and then click “INSTALL”. Wait for the installation to
finish.
The following window indicates that the installation finishes.
7. After installation, open device manager again and you can see the port USB-SERIAL CH340 (COMx).
So far, CH340 has been installed. Close all dialog boxes.

Freenove ESP32 Specifications

General

Brand	Freenove
Model	ESP32
Category	Computer Hardware
Language	English