146 Cyclone PRO User Manual
CYCLONE PRO
$001B: Error converting downloads counter structure
14.3 SAP Algorithm Header Operation Handling Errors
$0061: Undefined header operation, check software and firmware versions
14.4 SAP Operation Errors
$0081: SAP operation is not supported, check software and firmware versions
$0082: SAP operation error, SAP image contains different target type
14.5 SAP Blank Check Range and Module Errors
$1001: Blank check error, algorithm not supported
$1002: Blank check error, algorithm not found
$1003: Blank check operation failed
14.6 SAP Erase Range and Module Errors
$2001: Erase error, algorithm not supported
$2002: Erase error, algorithm not found
$2003: Erase error, module failed or canceled
$2004: Erase error, module failed, target is still secured
$2005: Erase error, module not performed, data is preserved
14.7 SAP Program Byte, Word, and Module Errors
$3001: Programming algorithm is not supported
$3002: Programming algorithm was not found
$3003: Program operation failed or canceled
$3004: Program operation failed, write protected
$300A: Error during reading data block, invalid data length
$300B: Error during reading data block, invalid start address
$300C: Error during reading data block, no target power
$300D: Error during programming data block, invalid data length
To Next Page
Loading...
