Cyclone PRO User Manual 1
CYCLONE PRO
1 INTRODUCTION
The Cyclone PRO is both a powerful production programmer and a versatile
development/debugging tool for Freescale microcontroller-based hardware
architectures.
The Cyclone PRO is designed to withstand the demands of a production
environment. It is a Stand-Alone Programmer (SAP) that can be operated
manually or used to host automated programming. In manual SAP mode the
unit is operated using buttons and/or the LCD Menu. Host-controlled SAP
mode, for automated programming, is accomplished using either a command
line utility, RS232 protocol, UDP protocol, or the Cyclone Automated Control
DLL.
The Cyclone PRO is also a very effective development tool. It can operate
interactively with a PC for development debugging and programming, and
conveniently supports multiple communication interfaces.
The following features help make the Cyclone PRO such a versatile tool for
both production and debug:
• Multiple Freescale Architecture Support
• ColdFire V1
•HCS08
•RS08
•HC(S)12(X)
•HC908 (MON08)
• Versatile Light Touch Buttons
• Performs Stand-Alone Programming (SAP) operations
• Navigates LCD menu
• Resets Cyclone PRO
To Next Page
Loading...
