2 Cyclone PRO User Manual
CYCLONE PRO
• Powerful LCD Menu
• Executes SAP operations
• Selects SAP image
• Configures Cyclone PRO IP settings
• Displays operation status
• Convenient LED Display
• Shows programming status during operation
• Indicates success or specifies source of failure
• Multiple Communication Interfaces
• Ethernet 10/100 baseT
• USB 1.1
• Serial Baud 115200, no parity, 8 data bits, 1 stop bit (adjustable to
57600 Baud for RS232 controlled production environment)
• Multiple Storage Media
• 3 Megabytes of onboard storage. Stores data to be programmed,
programming algorithms, and any necessary configuration settings.
• CompactFlash support available with purchase of CompactFlash
activation license.
• Versatile Power Management
• Uses electromechanical relays to automatically cycle target power
when necessary during security protocol (MON08) and BDM mode
entry.
• Jumper-settable power management schemes for MON08 and
BDM targets.
• Automatically supplies Vpp voltage for RS08 targets during flash
erasing and programming operations.
• Multiple Voltage Operation
• Automatically detects and caters to target voltages ranging from
1.8V to 5V.
To Next Page
