Cyclone PRO User Manual 3
CYCLONE PRO
• Multiple Frequency Operation
• Automatically detects and caters to target bus frequencies or BDM
frequencies ranging from 1MHz to 8MHz (MON08) or 16KHz to
50MHz (BDM).
• Provides a 9.8304 MHz or 4.1952 MHz oscillator signal to overdrive
target crystal and RC clock circuitry (MON08).
• Dynamic Signal Configuration
• Software-configurable port-pin settings for Monitor ROM entrance.
• Multiple SAP Images
• Onboard Flash stores up to 8 images.
• CompactFlash (if activated) stores more than 200 images.
• Images for different architectures can co-exist.
• Multiple Memory Modules In One SAP Image
• Supports multiple programming algorithms for internal or external
memory modules such as EEPROM and Flash.
• Automatic Serial Number Mechanism
• Supports serial number programming and automatic
incrementation
• Supports multiple serial number structures within each SAP Image.
• Powerful Automated Control Package For Production Control
• Basic Automated Control Package (included) supports host-
controlled SAP operations for one Cyclone PRO. Professional and
Enterprise Automated Control Packages available for purchase.
• Multiple Cyclone PROs can create a Gang Programmer using a
variety of different communication interfaces.
• Different SAP Images on different Cyclone PROs can execute
simultaneously.
• Mixed-architecture targets can perform SAP operations
simultaneously.
To Next Page
Loading...
