58 Cyclone PRO User Manual
CYCLONE PRO
8 PC-HOSTED DEBUG/PROGRAMMING SOFTWARE
Free or low-cost software options for interactively programming and
debugging HC08, HCS08, RS08, HC(S)12(X), or ColdFire V1 MCUs using a
PC are available from P&E Microcomputer Systems (www.pemicro.com) and
Freescale (www.freescale.com).
Note: The user should make sure they have the most recent version of these
software kits. The latest updates can be downloaded from the web pages
listed in Section 8.1.1 - Latest Updates - P&E Software and Section 8.2.1 -
Freescale CodeWarrior.
8.1 P&E Microcomputer Systems Software
P&E’s software packages contain the WinIDE integrated development
environment, which pulls together an assembler, in-circuit simulator, flash
memory programmer, and in-circuit debugger.
Figure 8-1: Hardware Selection in P&E PROG08SZ
8.1.1 Latest Updates - P&E Software
The most recent updates of P&E’s 68HC08 software products are available to
download, after a brief registration, at:
http://www.pemicro.com/ics08.
To Next Page
Loading...
