Cyclone PRO User Manual 47
CYCLONE PRO
panel with a list of the images currently on the unit’s internal memory. If the
CompactFlash license has been activated, a list of images on any connected
CompactFlash card will also be displayed in the bottom left panel. The panels
to the right can be used to add or delete additional images by using the Add
and Remove buttons beneath each panel.
Once the images that you wish to load appear in the panels to the right, you
must press “Commit Changes” to load the Cyclone accordingly. No changes
made to the Cyclone PRO until the “Commit Changes” button is pressed.
Note: Any images that are already stored on the Cyclone PRO or CompactFlash
can only be removed by using the corresponding “Remove All Images...”
button.
5.2.1 Optional CompactFlash Activation License
The CompactFlash Activation License is a license key, available for purchase
separately, which activates the Manage Images Utility and enables it to be
used with the Cyclone’s CompactFlash card interface. Activation of the
CompactFlash interface allows for programming of larger datasets and for the
storage of multiple programming images on a CompactFlash card.
For more details, please refer to Section 3.13 - CompactFlash Port.
To Next Page
Loading...
