Frick QUANTUM - Overview of Operator Interface

S90-600 O FRICK QUANTUM EVAPORATOR CONTROL PANEL
Page 2 OPERATION
Table of Contents
Quick Overview Of Graphic Screens ____________________________________________________________ 2
Overview Of Operator Interface ________________________________________________________________ 4
Operator Access__________________________________________________________________________ 4
Keys And Key Functions__________________________________________________________________ 5
Keypad Keys___________________________________________________________________________ 5
Screen Keys ___________________________________________________________________________ 6
To Change Setpoints ______________________________________________________________________ 6
Initial Setup Procedure _____________________________________________________________________ 7
Graphic Screens____________________________________________________________________________ 7
“Zone Overview” Screen____________________________________________________________________ 7
“Zone Overview” Screen - Screen Key Set ___________________________________________________ 8
“Zone Overview - 2” Screen _________________________________________________________________ 9
Zone Selected – “Operating Status” Screen __________________________________________________ 10
Evaporator Data Box: _________________________________________________________________ 10
Alarm Status Box: ____________________________________________________________________ 10
Evaporator I/O Status Box: _____________________________________________________________ 11
Defrost & Heating Status Box:___________________________________________________________ 11
Analog Readings Box:_________________________________________________________________ 11
“Operating Status” Screen - Screen Key Set _________________________________________________ 12
Zone Selected – “Main Menu” Screen ______________________________________________________ 13
“Main Menu” Screen - Screen Key Set _____________________________________________________ 13
Main Menu Selection - “Alarms/Shutdowns” Screen _________________________________________ 14
Main Menu Selection - “Control Setup” Screen _____________________________________________ 15
Control Setup - “Temperature Setpoint” Screens __________________________________________ 16
Control Setup - Temperature Setpoints – “Mode 1 Setpoints” Screen __________________________ 16
Control Setup - “Time Schedule” Screen ________________________________________________ 19
Control Setup - “Defrost Schedule” Screen ______________________________________________ 20
Control Setup - “Defrost Setpoints” Screen ______________________________________________ 21
Control Setup - “Heating Setpoints” Screen ______________________________________________ 23
Control Setup - “Safety Setpoints” Screen _______________________________________________ 24
Main Menu Selection - “Analog Calibration” Screen__________________________________________ 26
Analog Calibration - “Temperature Calibration” Screen _____________________________________ 27
Analog Calibration - “Humidity Calibration” Screen ________________________________________ 28
Analog Calibration - “Ammonia Calibration” Screen ________________________________________ 28
Analog Calibration - “Calibrate Motor Current” Screen______________________________________ 29
Main Menu Selection - “Service Screen” Screen ____________________________________________ 30
“Panel Setup” Screen ___________________________________________________________________ 31
Panel Setup - “Change Current Time And Date” Screen ______________________________________ 31
Panel Setup - “Temperature Units -- Degrees Fahrenheit Or Celsius” Screen _____________________ 31
Panel Setup - “Language – English, Spanish ” Screen _______________________________________ 31
Panel Setup - “Change Communications” Screen ___________________________________________ 31
Panel Setup - “Group Setup” Screen _____________________________________________________ 32
Panel Setup - “Screen Settings” Screen___________________________________________________ 32
“Security Setup” Screen _________________________________________________________________ 33
Alarms/Shutdowns Messages ________________________________________________________________ 34
Warning
The Quantum™ has the capability of being modified by the user/owner in order to obtain different performance
characteristics. Any modification to the standard default settings may have a severe negative impact on the
operation and performance of the equipment. Any modification to these control settings is the sole responsibility of
the user/owner and Frick disclaims any liability for the consequences of these modifications. It is possible that the
modification of these settings may cause improper operation and performance that results in property damage,
personal injury or death. It is the responsibility of the user/owner to evaluate and assess the consequences of their
actions prior to modifying the controls for this unit.