S90-600 O FRICK QUANTUM EVAPORATOR CONTROL PANEL
Page 4 OPERATION
OVERVIEW OF OPERATOR INTERFACE
The zone controllers are setup and monitored by a
computer based machine control system. The controller
continuously monitors the conditions and operation of
connected zone controllers and directs their operation.
The panel user interface has been designed to allow an
operator to efficiently access and control the operation of
the zones. The control panel screen is used for graphic
screens. By pressing a key on the keypad, the labeled or
described function is recognized by the control processor.
The following information in this manual is presented to
help the operator interact with the graphic screens and the
Quantum™ evaporator control panel. This manual is
intended to describe all presently available features.
OPERATOR ACCESS
Operator access to this system is through various screens.
A screen is the physical representation of data on the
screen. Icons have been used to help an operator quickly
identify functions. An icon is a small graphic symbol
representation. Each screen has a title area. The title is
descriptive of the screen. The current date and time is
shown in this title area. The day of the week, Sunday
(Sun.) through Saturday (Sat.) is displayed. The month of
the year from January (Jan.) to December (Dec.) is
displayed. The day of the month from 1 to 31 and the year
from 0001 to 9999 is displayed. The time displayed is the
current time in 24 hours (military) format. The hours,
minutes and seconds are displayed. The labeled keys on
the panel keypad provide quick access to the operator's
needs. By pressing a labeled key on the keypad, the
corresponding function is recognized. Most of the screens
have keys that describe or show a function that is
recognized when the coinciding key found at the right of
the screen is pressed. The screen keys provide access to
other screens or commands. For easier viewing, related
information is separated into boxes. The setup and
setpoint entry is separated into logical control
components. Setup selection of features and options has
been provided to prevent the operator from unnecessary
viewing and entering of unused control settings. The
required control settings are clearly presented. To further
assist the operator, an on-line help is provided.
Sometimes selections appear differently to indicate that
the feature is unavailable.
To Next Page
Loading...
