Froling S3 Turbo Installation Instructions

Table of Contents
1 General 4
1.1 About this manual 4
2 Safety 5
2.1 Hazard levels of warnings 5
2.2 Qualification of assembly staff 6
2.3 Personal protective equipment for assembly staff 6
2.4 Design Information 7
2.4.1 Notes on standards 7
General standards for heating systems 7
Standards for structural and safety devices 7
Standards for heating water 7
Regulations and standards for permitted fuels 8
2.4.2 Installation and approval of the heating system 8
2.4.3 General information for installation room (boiler room) 8
2.4.4 Requirements for central heating water 9
2.4.5 Notes for using pressure maintenance systems 11
2.4.6 Return lift 11
2.4.7 Combination with storage tank 12
2.4.8 Chimney connection/chimney system 14
Draught limiter 14
Measuring port 14
Boiler data for planning the flue gas system 15
3 Technology 16
3.1 Dimensions 16
3.2 Components and connections 17
3.3 Technical specifications 18
4 Assembly 23
4.1 Materials supplied 23
4.1.1 Tools required 23
4.2 Positioning 24
4.2.1 Temporary storage 24
4.3 Setting up in the boiler room 25
4.3.1 Remove boiler from pallet 25
4.3.2 Moving the boiler in the boiler room 25
4.3.3 Minimum distances in the boiler room 26
4.4 Before Installation 26
4.4.1 Changing door stops (as needed) 26
Converting the fuel loading door 28
4.4.2 Fitting the door handles 29
4.4.3 Setting and checking the seal on the doors 29
Positioning the doors 31
4.5 Installing the boiler 32
4.5.1 Assembly overview 32
Insulation 32
Air duct system 34
Table of Contents
2 Froeling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.at

Froling S3 Turbo Specifications

General

Brand	Froling
Model	S3 Turbo
Category	Boiler
Language	English