Fromm P328S - Page 22

Operation manual P328S
22
© 2018 FROMM Holding AG
All rights reserved. Reproduction and duplication - also in extracts - are not permitted.
7.10.5 ADVANCED Work Menu, SEMI Operation Mode (semi-automatic)
 Tension Key
• Pres the tension button until the set tension is reached.
- Once the set tension is reached, the welding process starts
automatically.
 Adjustable strap speed:
Up - faster (+)
Down - slower
 The tension can be interrupted by releasing the tension key and started
again.
• When the welding starts, release the tension key.
- The plastic material strap is welded and simultaneously removed from the remaining strap material.
Welding time, cooling-down time  See 7.10.1
 Tension Bar
 See 7.3 Tension Bar
 See 7.10.1
7.10.6 ADVANCED Work Menu, AUTO Operation Mode (automatic)
 Tension Key
 Reduce Risks / Prevent Improper Strapping
The tension can be interrupted by tapping the tension key again or by
lifting up the lever.
• Tap the tension key.
- Strapping is tightened until the set tension is reached.
- Once the set tension is reached, the welding process starts
automatically.
- The plastic material strap is welded and simultaneously removed
from the remaining strap material.
Welding time, cooling-down time  See 7.10.1
 Tension Bar
 See 7.3 Tension Bar
 See 7.10.1


+

