Contents
Safety rules 36
Explanation of safety notices 36
General 36
Proper use 37
Environmental conditions 37
Obligations of the operator 37
Obligations of personnel 37
Protecting yourself and others 38
Risks from mains current and welding current 38
EMC measures 39
Specific hazards 40
Safety measures at the installation location and during transport 41
Safety measures in normal operation 41
Commissioning, maintenance and repair 42
Safety inspection 42
Disposal 43
Safety symbols 43
Copyright 43
General 44
Device concept 44
Functional principle 44
Application areas 44
Options 44
Control elements and connections 45
Safety 45
Controls and connections on the front 45
Controls and connections on the rear 46
Before commissioning the power source 48
Security 48
Utilisation in accordance with „intended purpose“ 48
Requirement 48
Setup regulations 48
Mains connection 49
Commissioning the power source(s) 50
Security 50
Commissioning the power source 50
Commissioning the power source - parallel configuration 51
Operation 53
Security 53
Arc watchdog 53
Activating/deactivating the safety function 54
Safety function for immediate stop, dependent on an external device 54
Safety 54
Preparations 55
Location of MM_ARC PCB in the power source 56
Activating/deactivating the safety function 56
Finally... 57
Troubleshooting 58
General remarks 58
Safety 58
Power source - troubleshooting 58
Displayed service codes 59
Care and maintenance 62
General remarks 62
Every start-up 62
Every 6 months 62
Technical data 63
Special voltages 63
Technical Data - BIAS 300 Plasma 63
Power characteristic 64
35
EN
To Next Page
Loading...
