Fronius BIAS 300 Plasma - Final Assembly

X15
1
2
3
(a)
(b)
1
2
3
X15
(2)
(2)
Setting options for jumper X15
1
Move jumper X15 (1) to the desired position:
a)
Jumper (2) in position 2 + 3 Safety function is deactivated (= factory de-
fault)
b)
Jumper (2) in position 1 + 2 Safety function is activated
Finally...
(1) (3)(2) (1)
(1) (1)
(1)
(4)
(1)
(1)
(1)
Fitting the left-hand and right-hand side panels
1
Fit the right-hand side panel (3) of
the power source using 8 TX20
screws
2
Fit the left-hand side panel (2) of
the power source using 8 TX20
screws (1)
57
EN