Fronius BIAS 300 Plasma - Control Elements and Connections; Front Panel Controls

Control elements and connections
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device
and all system components.
Controls and
connections on
the front
(1)
(5)
(4)
(3)
(2)
BIAS 300 Plasma front view
(1) Power source indicator On
lights up when the power source is plugged into the mains and the mains
switch is in the - I - position
(2) Robot interface indicator
lights up when the power source is switched on, provided that a robot in-
terface or a field bus coupler is connected to the LocalNet and there is a
data connection to the interface
(3) Error indicator
lights up until the interface is initialised by the external control or if an er-
ror occurs during operation.
The error messages displayed are described in the section headed “Trou-
bleshooting”.
45
EN