89
EN
Tools and measuring devices
General "Tools and measuring devices" offers an overview and description of all equipment needed
to service the device professionally. This equipment includes:
- Tools required
- Measuring and testing equipment
- Ancillary materials
Tools required - Torx screwdriver, TX 20
- Torx screwdriver, TX 25
- Slotted screwdriver, 3 mm
- Slotted screwdriver, 6.5 mm
- Socket wrench
- Socket wrench insert, 5.5 mm
- Socket wrench insert, 8 mm
- Socket wrench insert, 10 mm
- Socket wrench insert, 13 mm
- Socket wrench insert, 40 mm
- Flat spanner, 5.5 mm
- Flat spanner, 8 mm
- Flat spanner, 10 mm
- Flat spanner, 13 mm
- Flat spanner, 40 mm
- Diagonal cutting pliers
- Needle-nosed pliers
- Gas pliers
- Torque screwdriver with bit insert, 1 - 6 Nm
- Torque ratchet, 1 - 20 Nm
Measuring and
testing equip-
ment
- Digital multimeter
- Safety inspection equipment
Ancillary materi-
als
- Assembling aid - power modul (42,0201,4317)
- Cleaning materials (spray, paper)
- Cable tie types 102 and 200
To Next Page
Loading...
Need help?
General
