System
General General settings
1
In the "System name" input field, enter the name of the system (max. 30 characters).
2
"Synchronize time automatically" enabled → select "Area time zone" and "Location
time zone". The date and time are applied from the time zone entered.
2
"Synchronize time automatically" disabled → enter or select "Date", "Time", "Area
time zone" and "Location time zone".
3
Click on the "Save" button.
Update All available updates are made available on the product page and in the "Download
search" area under www.fronius.com .
Firmware update
1
Drag the firmware file into the "Drag&Drop file here" field or select it using "Select
file".
The update will start.
Setup wizard The guided setup wizard can be accessed here.
Restoring the
factory settings
All settings
All configuration data is reset with the exception of the country setup. Changes to the
country setup may only be carried out by authorized personnel.
All settings with no network
All configuration data is reset with the exception of the country setup and the network
settings. Changes to the country setup may only be carried out by authorized personnel.
Event Log Current events
All current events of the connected system components are shown here.
IMPORTANT!
Depending on the type of event, these must be confirmed via the "tick" button in order to
be processed further.
Archived
All events of the connected system components that no longer exist are shown here.
Information This menu displays all system information and the current settings.
Save as PDF
1
Click on the "Save as PDF" button.
2
Individually select information with the "tick" next to the information or tick to "Select
all".
103
EN
To Next Page
Loading...
