Operating mode –
Inverter with bat-
tery and Ohmpi-
lot
Operating mode –
Inverter with bat-
tery, Ohmpilot
and backup
power function
IMPORTANT!
In the fully equipped hybrid PV system with a Fronius Ohmpilot, the Ohmpilot cannot be
operated in the event of a power failure for regulatory reasons. It is therefore sensible to
install the Ohmpilot outside of the backup power branch.
Operating mode –
Inverter with bat-
tery and addition-
al inverter
In the hybrid photovoltaic system, batteries must only be connected to one inverter with
battery support. Batteries cannot be split between multiple inverters with battery support.
However, depending on the battery manufacturer, several batteries can be combined on
one inverter.
19
EN
To Next Page
Loading...
