(9) Connection area divider
(10) 10 x DC cable glands
(11) Optional cable gland (M16)
(12) Optional cable gland (M16 - M20)
(13) Optional cable gland (M16 - M32)
(14) Optional cable gland (M16 - M25)
Connection area
divider
The connection area divider separates the high-voltage conductors (DC and AC) from
the signal lines. To make it easier to reach the connection area, the divider can be re-
moved for the connection work, and must be re-inserted.
(1) Integrated cable duct
(2) Recesses for removing the con-
nection area divider
(3) Snap tabs for locking/unlocking
(4) Defined breaking point for the Dat-
com connection
The integrated cable duct (1) allows for the
lines to be laid from one area of the invert-
er to the other. As a result, multiple invert-
ers can be easily installed next to each
other.
Ground electrode
terminal
The ground electrode terminal Allows
additional components to be earthed, such
as:
- AC cable
- Module mounting system
- Ground rod
29
EN
To Next Page
Loading...
