1
Open the hand grip as per the “Open-
ing the hand grip” chapter
2
Remove the coupling housing (1) and
Minitek plug (2) from the guide
3
Carefully open the Minitek plug (2)
lock
4
Remove the socket housing (3) by
pushing forwards
(3)
(5)
(2)
(4)
(3)
ABCDEF
-d
Brown
Grey
White
Pink
Green
Yellow
U/D
NOTE!
Observe the pin assignment
*
(color-
coded arrangement of the wires) for
each interface version and note it down
in advance.
5
Release the wires (4) using tweezers
and pull them out
6
Replace the socket housing (3)
7
Insert the wires (4) into the socket
housing (3) according to the color-
coded arrangement
*
per interface ver-
sion and check the lock
8
Push the socket housing (3) into the
Minitek plug (2) and lock it (5)
28
To Next Page
Loading...
