Fronius THP 120 - 300 SH - Opening the F++ Connection; Replacing Hose Components

Opening the F++
connection
(1)
(1)
(1)
(1)
1
Unscrew four TX 8 screws (1)
2
Remove upper and lower base shell
on the F++ connection
Replacing hose
components
(1)
(2)
Hand grip disassembly
1
Open the hand grip as per the “Open-
ing the hand grip” chapter
2
Remove the coupling housing as per
the “Replacing the coupling housing”
chapter
3
Pull the power cable (1) out of the
insulating plate (2) and unclip the
existing connections
NOTE!
Before removal, align sharp-edged
hose clamps accordingly to protect the
hose fabric.
20