Tools and measurement devices
General The "Tools and measurement devices" chapter contains an overview and description of
all the tools needed to properly service the device. This includes the following tools:
- Required tools
- Tool adapters
- Measuring and inspection equipment
- Auxiliary materials
All the required special tools, measuring and inspection equipment can be found in the
equipment lists at "downloadcenter.fronius.com".
Required tools - TX 6 screwdriver
- TX 8 screwdriver
- Torque screwdriver 1–6 Nm (42,0411,0013)
- Torque screwdriver 0.4–1.2 Nm (42,0435,0210)
- Torque screwdriver for socket (42,0411,0168)
- Socket 1/4" contact element (42,0001,6754)
- Size 7 mm wrench
- Size 8 mm wrench
- Size 10 mm wrench
- Size 11 mm wrench
- Needle-nosed pliers
- Side cutters
- Vise-grip wrench
- Oetiker pliers
- Knife
- Extractor tool
Tool adapters Small-handle manual torch version
- Threaded adapter hose retraction (42,1000,0364)
d and i manual torch version
- Threaded adapter hose retraction (44,0001,0017)
Measuring and
inspection equip-
ment
Equipment for inspection according to PP-SER-2010 test schedule
- Insulation test:
- Insulation meter (Metriso 5000)
Equipment for inspection according to PP-SER-2001 test schedule
- Gas flow rate test:
- Test box torch flow rate (4,078,016)
- Water flow rate test:
- Flow rate and leak test device (torch test bench)
- Short circuit adapter TTB ML W (42,1600,0015)
- Short circuit adapter lock TTB (44,0001,0016)
Equipment for inspection according to PP-SER-2002 test schedule
- Voltage drop measurement
- Digital multimeter
- Current load test adapter (44,0001,0018)
7
EN-US
To Next Page
Loading...
