Fronius THP 120 - 300 SH - Replacing the Protective Hose

29 cm
5 cm
6,50 cm
(6)
(7)
A
B
33 cm
5 cm
6,50 cm
50 cm73 cm
76 cm
(1)
(2)
(3)
(4)
(5)
40 cm
HPT 400i (water-cooled)
Item Name
A Central connector end
B Clutch connector end
(1) Water return hose outside the protective hose (yellow)
(2) Water flow hose (red)
(3) Control line incl. plug (green)
(4) Power cable incl. connections (orange)
(5) Gas hose (purple)
(6) Strain-relief device
(7) Protective hose
Replacing the
protective hose
1
Apply Loctite 424 to the strain-relief
device and push on one end of the
new protective hose
2
Glue the strain-relief device and pro-
tective hose correctly and allow them
to dry
3
Apply Loctite 424 to another strain-
relief device and push on the other
end of the new protective hose
4
Glue the strain-relief device and pro-
tective hose correctly and allow them
to dry
52