Fronius THP 120 - 300 SH - Page 21

Disassembling the F++ connection
1
Disassemble the F++ connection as
per the “Opening the F++ Connection”
chapter
Removing hose components
1
Lay hosepack straight and pull out
hose components via F++ connection
(1)
(2)
(1)
(3)
(1)
Water
Replacing components
1
Replace components, connections
and hoses as per the Spare Parts List
Water-cooled version:
2
Connect the power cable (1)
3
Seal the gas connection (2) in the
thread with Loctite 542, tighten and
secure the gas hose with clamp 7
4
Seal the water connection (3) in the
thread with Loctite 542, tighten and
secure the water hose with clamp 8
(1)
(1)
(2)
(1)
Gas
Gas-cooled version:
2
Connect the power cable (1)
3
Seal the gas connection (2) in the
thread with Loctite 542, tighten and
secure the gas hose with clamp 8
21
EN-US