Inserting hose components
1
Screw M7 power connection (1) onto
retractable adapter (2)
2
Insert Minitek plug (3) into adapter
recess
3
Place gas and optional water hoses
onto the power cable 4.5 cm behind
the power connection (4)
4
Wrap Minitek plug and hoses in
adhesive tape (5) and secure for
drawing in
5
Insert the hosepack via the F++ con-
nection so that there is a gap of 12 cm
between the ball joint (hand grip) and
the power cable
6
Close retractable adapter
Assembling the F++ connection
1
Close the F++ connection as per the
“Closing the F++ connection” chapter
22
To Next Page
Loading...
