Fronius THP 120 - 300 SH - Page 47

(3b)
(3a)
(4)
(3a)
4
Close the hand grip and secure with
three TX 8 screws (3)
NOTE!
Screw 3a: TX 8 - 2.5 x 12 mm
Tightening torque: 0.6 Nm
Screw 3b: TX 8 - 2.5 x 6 mm
Tightening torque: 0.35 Nm
5
Slide on the union nut (4) and close
(6a)
(6b)
(5)
6
Attach the operating element (5) and
fit the rocker switches (6)
NOTE!
6a = large rocker switch
6b = small rocker switch
7
Attach torch body according to the
“Attaching the torch body” chapter
47
EN-US