Fronius TransTig 170 - Page 49

49
EN-US
I
E
Final current
1 - 100% (of the main current I
1
)
Factory setting: 30%
Pulses *
F-P (pulse frequency)
off / 0.2 - 990 Hz
Factory setting: off
Tacking *
Duration of the pulsed welding current
off / 0.1 - 9.9 s / on
Factory setting: off
* The pulsing and tacking parameters are only displayed if the setup parameter "Ptd
- pulse TAC display" is set to "on".