Fronius TTB 80 G User Manual

A
B
1
2
1
2
*
- * = Inside pocket
- Attach the two Velcro strips supplied to the inside pocket
6
*
A B
2
1
- * = Inside pocket
- Assemble the TIG Multi Connector and position it next to the inside pocket
7
8
Close the protective bag
9
Connect the interconnecting hosepack to the power source
- The interconnecting hosepack is connected in the same way as the welding
torch - see section Connecting the welding torch from page 68
76

Fronius TTB 80 G Specifications

General

Brand	Fronius
Model	TTB 80 G
Category	Welding System
Language	English