Fuji Electric FVR-C11S-7EN Series - Page 10

FVR-C11S-EN
8 Safet
y
Instructions
Instruction on maintenance/inspection,
and replacement
Instruction on disposal
General instructions
WARNING
1. Do not commence inspection work until at
least five minutes after the power has been
turned off (OPEN).
(In addition, make sure that the char
g
e
lamp has
g
one off and check that the DC
volta
g
e between terminals P(+) and N(-)
does not exceed 25V DC.)
Otherwise electric shock could occur.
2. Onl
y
qualified personnel should perform
maintenance and inspection or replace-
ment operations.
(Take off all metal objects (watch, rin
g
,
etc.) before startin
g
.)
(Use well-insulated tools.)
Otherwise electric shock or in
j
ur
y
could
occur.
3. Never modif
y
the product.
Otherwise electric shock or in
j
ur
y
could
occur.
CAUTION
Since this product contains lead solder,
it must be treated as industrial waste
when it is disposed of. Entrust it to a
waste processin
g
compan
y
when dis-
posin
g
it.
The fi
g
ures in this operation manual ma
y
show the inverter with covers and safet
y
screens removed to explain the structure in
details. Therefore, be sure to replace the cov-
ers and screens to their ori
g
inal positions and
operate the inverter accordin
g
to the instruc-
tion manual.