13 Problem Solving
272
Problem Solving
13
035-550 [Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
035-703 [Cause] An error occurred during fax transmission.
[Remedy] The machine will automatically recover. Wait for a while, and try
again.
035-704 [Cause] An error occurred while sending a fax.
[Remedy] The machine will automatically recover. Wait for a while, and try
again.
035-708
035-728
035-741
035-748
035-758
035-759
[Cause] An error occurred while sending a fax during fax transmission.
[Remedy] The machine will automatically recover. Wait a moment, and try
again.
035-761 [Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
036-506 [Cause] An error occurred during fax transmission.
[Remedy] The machine will automatically recover. Wait for a while, and try
again.
036-550 [Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
036-700 [Cause] An error occurred during fax transmission.
[Remedy] The machine will automatically recover. Wait for a while, and try
again.
036-740 [Cause] An error occurred during fax transmission.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
036-777
036-796
[Cause] An error occurred during fax transmission.
[Remedy] The machine will automatically recover. Wait for a while and try
again.
041-210
041-211
[Cause] An error occurred in Tray 1.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
042-325 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
042-400 [Cause] The odor filter life is over.
[Remedy] Contact our Customer Support Center.
042-608
042-614
[Cause] The Voc filer life is over.
[Remedy] Contact our Customer Support Center.
Error Code Cause and Remedy
To Next Page
Loading...
Need help?
General
