Error Code
273
Problem Solving
13
042-614 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
045-310 [Cause] An error occurred.
[Remedy] Removed the jammed paper.
Refer to "Paper Jams" (P.278).
045-313
045-218
061-321
061-325
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
062-277 [Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
062-300 [Cause] The cover was open when a document was placed in the document
feeder.
[Remedy] Close the cover.
062-311 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
062-360
062-371
062-380
062-386
062-389
062-396
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
071-105 [Cause] An error occurred in the left cover [A] or Tray 1.
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
072-102 [Cause] An error occurred in the one tray module cover [B] or Tray 2.
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
072-105 [Cause] A paper jam occurred in the one tray module cover [B].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
072-210
072-212
072-215
[Cause] An error occurred in Tray 2 (One Tray Module).
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
073-102 [Cause] A paper jam occurred in the two tray module cover [C] or Tray 3.
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
Error Code Cause and Remedy